AK47 Gear

AK47 Gear

AK Strikeforce Handguards

AK Strikeforce Handguards

AK Strikeforce Handguards
Click to enlarge image(s)
Ergonomic Design
Non-Slip Design
Ventilated Upper & Lower Handguards
One 4" and Three 2" Picatinny Rails
Molded Inserts for When Rails Are Not Used
Rails are Removable and Interchangeable
Sling Swivel Stud
Count towards US Compliance Parts
Made in USA
Lifetime Warranty
No Gunsmithing
Note: This set will fit the W.A.S.R. 10, MAK-90, Maadi, Vector, Arsenal, and most others but will not work with the Yugo models.
AK Strikeforce Pistol Grip

AK Strikeforce Pistol Grip

AK Strikeforce Pistol Grip
Click to enlarge image(s)
Ergonomic,Textured Pistol Grip
• Installs with Original Mounting Hardware (Screw & Nut)
• Counts Toward US Compliance Parts
• Virtually Indestructible
• Matte Black
• Glass-Filled Nylon
• Made in USA
• Lifetime Warranty
• No Gunsmithing
AK Strikeforce Package

AK Strikeforce Package

AK Strikeforce Package
Click to enlarge image(s)
• Six-Position Collapsible/Side Folding
• Folds to the Left Side of the Receiver (One Second Open/Close)
• Removable/Adjustable (3/8”) Cheekrest
• Removable Buttpad
• Store Extra Light/Laser/Batteries Inside Stock Tube
• May be fired from folded position
• Sling Swivel Stud
• Improved Ventilation
• Use Original Mounting Hardware for Installation
• Assembled in Fixed Position
• Ergonomic and Textured Upper and Lower Handguards
• One 4” and Three 2” Picatinny Rails
• Molded Inserts for When Rails are Not Used
• Rails are Removable and Interchangeable • Handguards are Ventilated
• Sling Swivel Stud
• Count Towards US Compliance Parts
• Ergonomic, Textured Pistol Grip
• Installs with Original Mounting Hardware (Screw & Nut)
• Matches Advanced Technology, Inc Handguards
• Counts Toward US Compliance Parts
• Virtually Indestructible
• Matte Black
• Glass-Filled Nylon
• Made in USA
• Lifetime Warranty
• No Gunsmithing

Conversion kit may only be utilized on AK’s using folding stocks prior to 11/90 or you must have enough compliance parts to be legal as a folder; assembly otherwise may be in violation of Sec. 922(R). NOTE: Stock and handguard are Made in USA and count towards compliance parts.
ATI AK-14 MAK-90 Fiberforce Stock

ATI AK-14 MAK-90 Fiberforce Stock

ATI AK-14 MAK-90 Fiberforce Stock
Click to enlarge image(s)
Fiberforce Dragunov Sniper design for military look and style. Ambidextrous. Virtually indestructible, Matte Black Glass-Filled Nylon. Easy "Drop-In" installation and no gunsmithing required. Fits Milled and Stamped Receivers. Features built-in cheekrest, 1 inch extended length, ventilated forearm, thumbhole grip and dowel sling mount, scratchproof and weatherproof. Made in the USA and comes with a Lifetime Warranty. Fits AK, MAK-90 and Maadi.
AK-47 Hand Guard (Advanced Technology)

AK-47 Hand Guard (Advanced Technology)

AK-47 Hand Guard (Advanced Technology)
Click to enlarge image(s)
These awesome hand guards are finally available as a separate item.
Until now you could only get them with the AK Fiberforce stock set.

Installation is very simple

To remove gas tube/handguard assembly: Raise lever on right side of rear sight base. The assembly can then be removed by lifting upward on the rear end. To remove the wood from the assembly, rotate the wood around the gas tube 180 degrees and lift it off.
To remove the lower forearm wood: Raise the small locking lever located inside the right side of the forearm front barrel band. Rotate the locking lever 180 degrees forward - as far as possible. The barrel band should then slide forward releasing the front of the forearm.
To install new lower forearm: Insert lower forearm rear locator tab into recess in front of receiver. While holding front of forearm against barrel, work barrel band rearward over front of forearm. Then return the barrel band locking lever to the locked position.
To ease assembly/disassembly all screw threads must be thoroughly lubricated prior to installation. To install new upper handguard: First install gas tube (minus wood) by reversing removal process.
SKS OR AK FIBERFORCE BUTTPAD

SKS OR AK FIBERFORCE BUTTPAD

SKS OR AK FIBERFORCE BUTTPAD
Click to enlarge image(s)
Fits our SKS & AK Fiberforce stock.
Simply slip-on. Absorbs recoil. Adds 1 inch length.
SKS OR AK SLING

SKS OR AK SLING

SKS OR AK SLING
Click to enlarge image(s)
Specially designed tapered end fits all SKS or AK stocks and more.
Adjustable 1 1/4” black nylon strap. Quick detachable swivel and leather tab.
Made in USA by Advanced Technology