AK-47 Stock Sets - ifatactical.com

Made in USA

Click to enlarge image(s)

In Stock

Designed with direct input from our military clientele, our AK FUSION handguard set enhances the look and function of your AK47. The lower handguard houses a concealed Picatinny rail for mounting lights, lasers, or vertical grips. The matched upper handguard offers increased dissipation and improved styling. This item counts as 1 U.S. Sec 922R compliant part. If you like the traditional AK-47 look but also want the option of adding a vertical fore grip, laser, tactical light, or red dot sight then this is the hand guard set for you.
When it comes to quality, Tapco is the gold standard.

Click to enlarge image(s)

Patterned after the original Bulgarian fixed stock for the AK, this stock allows you to retain the original look of your AK while adding a compliance part. The stock comes complete with a metal buttplate and a sling swivel on the side. Manufactured by TAPCO in the U.S. and constructed of military grade composite. This item is marked as "TAPCO USA" and counts as 1 U.S. Sec 922R compliant part.

Click to enlarge image(s)

Use MNT-HG479SA for MAK-90, Arsenal, & Vector rifles.

This AK-47 Quad Rail system is Precision machined with maximum strength like all UTG products.
Four mil-spec Picatinny rails for versatile accessory applications.
Clever rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and secure fit-
Lower quad-rail system to secure barrel
Upper quad-rail system to secure gas tube
Simple and friendly installation, no gunsmith or tool required.
Great zero-retention capability for all accessories installed on the rails.
Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance.
Ultimate tactical solution to enhance accuracy under toughest environments.
Fits model 47 and variants.
Hard anodized finish for wear resistance.
Great quality UTG rubber rail guards included for comfort and protection.
Will not fit Saiga or Yugo

Click to enlarge image(s)

Now Made i USA

For Model 47 and most Variants with Standard/Oversized Barrel and Rear Sight Block (MAK-90, Vector, Arsenal) Will not fit the Saiga or Yugo

Precision machined with maximum strength
Four 6” long mil-spec Picatinny rails with 14 slots each for versatile accessory applications
Clever rail system locking design includes lower connecting walls mating with upper channels to achieve the most solid and
secure fit-
Lower quad-rail system to secure barrel
Upper quad-rail system to secure gas tube
Simple and friendly installation, no gunsmith required
Great zero-retention capability for all accessories installed on the rails
Intensively tested by field experts under extreme heat and sub-zero temperature and demonstrates most satisfactory performance
Specially designed groove rail top for optimal viewing through front sight
Fits Model 47 and variants with oversized barrel and rear sight block
Hard anodized finish for wear resistance
UTG rubber rail guards included for great comfort and protection
Now made in USA

Click to enlarge image(s)

Back in stock

AK-47 T-6 six position stock for stamped receivers. Like all Tapco products, this stock is guaranteed for life. Installation is very simple and can be completed in less than ten minutes.

Click to enlarge image(s)

New Lower Price!!!

Patterned after the classic Galil design, this AK folding stock is manufactured for stamped receivers.
Ideal for use in vehicle operations of confined spaces.
Constructed of military grade composite for years of use.
This item is marked “Tapco USA” and counts as 1 U.S. sec922R compliant part.

Click to enlarge image(s)

Influenced by the rugged Israeli rifle, this hand guard improves your AK with added ventilation and reduced barrel heat. Having a wider grip area offers the shooter increased control and consistent shot placement. This hand guard also features 3 accessory rails for easy installation of mission specific equipment such as forward grip, light, laser, and others. There is no need to replace or modify any parts on your rifle as this item simply replaces the original hand guard. This Item is marked “Tapco USA” and counts as 1 U.S. sec 922R compliant part.

Click to enlarge image(s)

Influenced by the rugged Israeli rifle, this hand guard improves your AK with added ventilation and reduced barrel heat. Having a wider grip area offers the shooter increased control and consistent shot placement. There is no need to replace or modify any parts on your rifle as this item simply replaces the original hand guard. This Item is marked “Tapco USA” and counts as 1 U.S. sec 922R compliant part.

Click to enlarge image(s)

Great new product

Robust Design with combat grade synthetic material. Ergonomic finger grooves provide solid and repeatable grip. Additional hand support provides stable and easy trigger control. Concealed compartment for small parts and tools. Very well designed to offer great comfort and increase shooting performance and accuracy.

Click to enlarge image(s)

Fiberforce Dragunov Sniper design for military look and style. Ambidextrous. Virtually indestructible, Matte Black Glass-Filled Nylon. Easy "Drop-In" installation and no gunsmithing required. Fits Milled and Stamped Receivers. Features built-in cheekrest, 1 inch extended length, ventilated forearm, thumbhole grip and dowel sling mount, scratchproof and weatherproof. Made in the USA and comes with a Lifetime Warranty. Fits AK, MAK-90 and Maadi.

Click to enlarge image(s)

Sold Out

These awesome hand guards are finally available as a separate item.
Until now you could only get them with the AK Fiberforce stock set.

Installation is very simple

To remove gas tube/handguard assembly: Raise lever on right side of rear sight base. The assembly can then be removed by lifting upward on the rear end. To remove the wood from the assembly, rotate the wood around the gas tube 180 degrees and lift it off.
To remove the lower forearm wood: Raise the small locking lever located inside the right side of the forearm front barrel band. Rotate the locking lever 180 degrees forward - as far as possible. The barrel band should then slide forward releasing the front of the forearm.
To install new lower forearm: Insert lower forearm rear locator tab into recess in front of receiver. While holding front of forearm against barrel, work barrel band rearward over front of forearm. Then return the barrel band locking lever to the locked position.
To ease assembly/disassembly all screw threads must be thoroughly lubricated prior to installation. To install new upper handguard: First install gas tube (minus wood) by reversing removal process.

Click to enlarge image(s)

Out of stock

Inspired by the M249 squad automatic weapon, the AK SAW grip features a more ergonomic angle and increased width for greater comfort and control. Inside the grip housing is a useful storage compartment. Constructed of military grade composite for years of use.
Item marked “Tapco USA” and counts a 1 U.S. sec 922R compliant part.

Click to enlarge image(s)

Ergonomically designed with finger grooves & back strap.
Surfacing enhances grip and minimizes slippage when wet.
Comes complete with mounting bolt.

Click to enlarge image(s)

Our Dragunov Design MAK-90/AK-47 stock features a convenient thumbhole design and our adjustable length of pull spacer system. This system allows you to adjust the length of pull from 13" to a 14 1/2" length by adding spacers. Other features include tough fiberglass filled polymer, black matte textured finish, 1" thick rubber recoil pad, Russian style steel sling mount pin and we include a matching upper and lower hand guard with our stocks.

FUSION AK Handguard

AK Original Style Buttstock

AK-47 Quad Rail

479 Quad Rail System Mount

AK-47 T6 Stock

AK-47 folding stock

Tapco AK-47 Galil Hand guard with Rails

AK-47 Galil Hand Guard

AK47 Ergonomic Pistol Grip

ATI AK-14 MAK-90 Fiberforce Stock

AK-47 Hand Guard (Advanced Technology)

AK-47 SAW Pistol Grip

AK-47 Eronomic Pistol Grip

MAK-90/AK-47 Dragunov Stock Milled Receiver