|
|
 AR-15 Stocks
 AR-15 6 Position Stock
 |
|
Click to enlarge image(s)
|
Made In USA.
6 position collapsible stock for all AR-15 type weapons.
Includes the stock, spring, buffer, & aluminum tube.
This stock has been completely redesigned to be the toughest and most reliable standard M4 type stock available.
 M4 Butt Pad
 |
|
Click to enlarge image(s)
|
Deluxe Military Style Butt Pad with Ergonomic Design
• Military Symbols and Smart Slip-on Sleeve Design with Lip Re-enforcement for a Perfect Fit
• For Model 4/15 6 Position Retractable Stock
• 1" Extension
 AR-15 A2 Stock
 |
|
Click to enlarge image(s)
|
. New Gen Model 15 Standard A2 Butt Stock Assembly
• Stock Molded from Impact Resistant Advanced Polymer
• Complete with A2 Extension Tube, Recoil Spring, Buffer Assembly, Stock Spacer and Screw
• Storage Pocket for Cleaning Kit, Small Parts, and Other Accessories
 CP2 M4 Cheek Piece
 |
|
Click to enlarge image(s)
|
Sold Out
The CP2 is a cheek riser designed for the standard M4 six position stocks.
The CP2 simply snaps on in seconds and puts your eye at the perfect height to use your optics with comfort. No more stiff neck.
 Choate AR-15 E2 Stock
 |
|
Click to enlarge image(s)
|
Telescoping AR15/M16 stock with Battery storage. Comes with Recoil spring tube, spring and buffer
Introducing the new Telescoping AR15/M16 stock with battery storage tubes on the side. This five position telescoping stock has two storage compartments with O-ring sealed screw in caps. The storage compartments are water tight and will hold two AA or three 123 Lithium batteries in each side. The stock has a nonslip hard rubber butt plate and three places to attach a sling These stocks have our life time warranty and built tough enough so you never have to use it.
 ACE AR-15 Ultra Light Entry Stock
 |
|
Click to enlarge image(s)
|
Sold Out
Same as the Ultra Light except the overall length is 7.125". Uses a special short receiver extension tube - included. CAR length buffer and spring not included.
 ACE Full Length AR-15 SOCOM Stock
 |
|
Click to enlarge image(s)
|
M4 SOCOM (L) ACE's infamous super heavy duty stock is available now with a full length receiver extension tube. Uses an A1/A2 buffer and spring (not included). Can also use pneumatic recoil systems and on all .308 (7.62 X 51mm) AR type rifles. Length 9.5" to 11.5" in five 1/2" increments. Length of pull from 11.5" to 13.5" measured with out recoil pad. A 1/2" recoil pad is included. Foam cheek rest is approximately 6" long.
 ACE M4 SOCOM Stock
 |
|
Click to enlarge image(s)
|
Designed with input from combat experienced SF soldiers. This is the strongest production AR15/M16 stock available! Approximately 6 times stronger than an AR15 A2 stock & receiver extension tube. Ideal for CQB or breaching doors, and without the fear of bending the receiver extension tube ( which disables the rifle ). Adjustable length of pull, adjusts from 7.5" to 9.5" in five 1/2" increments. The M4 SOCOM comes with extra hardware so that it can be set up to be a rock-slid fixed (non-adjustable) stock. This set-up is ideal for dynamic entry, extreme CQB or large caliber AR conversions. Closed-cell foam overtube provides an extremely comfortable cheek weld. This stock mounts "rock solid' to the rifle with no movement making it an ideal stock for precision shooting as well. Ambi-sling mount / gusset reinforces the receiver extension tube at its weakest point- just behind the receiver. Four sling positions allows optimum sling mount flexibility. With the 1.0" pad it is also ideal for use with .50 BMG AR uppers. Comes with your choice of 1.0" or .5" recoil pads. Uses carbine length buffer and spring ( not included ).
New M4 SOCOM '06. Has the following updates: removable, ambidextrous ss-ar sling swivel; tapered extension tube and gusset; larger stronger clamp screw; improved slide key; square taper locking plunger.
L.O.P. fully collapsed 11.0 " and fully extended 13.0" without recoil pad. Weight: 460g (16.5 oz)
 Super Heavy Duty ACE M4-7
 |
 |
|
Click to enlarge image(s)
|
You are in a combat situation. You dive into a ditch and land on your rifle. You bend your receiver extension tube slightly (as little as 2 degrees). You return fire... first round, rifle malfunctions and your bolt carrier is stuck in your receiver extension tube. Worse, the stuck bolt carrier will not allow you to field strip your rifle and clear the malfunction. Don't let this happen to you! Buy an ACE M4-7 or a M4-7 RET. M4-7 and M4-7 RET. Patent pending.
Gusset reinforced receiver extension tube (RET) is many times stronger than the current issue mil. spec. RET. A tapered RET and gusset reinforce the receiver, and when the gusset screw is tightened the gusset is pulled tight into the receiver.
Laser etched delineations, ensure a visual confirmation of your stock's position.
Seven position for the perfect fit. RET extends out to 11.0" long in seven 5/8" increments. Fully collapsed it is the same length as any other M4 six position stock- 7.3".
Adjustable screw in stainless steel stops, allow repeat adjustment to the same position every time in any conditions.
Adjustable shim screw-in RET allow slop and rattle to be adjusted out of the stock.
Four sling positions. "Ambi" single point, top and bottom.
Includes SS-AR, rubber coated, 360 degree, 1 1/4" sling swivel.
 ARFX Entry stock
 |
|
Click to enlarge image(s)
|
ARFX Entry stock. This stock is only 7.25" long without recoil pad; yet is strong enough for its intended purpose "Close Quarters Battle." CQB usually involves heavy armor and the need for a stock that can be used to breech light doors or in hand to hand combat. Uses CAR length buffer and spring (not included). Special receiver extension tube, Sling swivel, foam overtube and choice of .5" or 1.0" recoil pad are included.
Length 7.25". L.O.P.=10.45" (without recoil pad ) Weight: 265g ( 9.7 oz)
 AR15 Skeleton Stock
 |
|
Click to enlarge image(s)
|
The AR15 Skeleton Stock - ARFX. The ARFX is 3.6 oz lighter than the A2 stock, while still retaining high strength and durability. A closed-cell foam "overtube" provides a super comfortable cheek weld, and it insulates the shooter's face from vibration and temperature extremes.
The ARFX also sports three sling positions: right and left behind the receiver and one at the toe of the butt. Uses a standard A1/A2 receiver extension tube, buffer and spring ( not included ). Includes .5" thick rubber "over-mold" recoil pad. Can be installed on " Post Ban" rifles.
Over all length 9.8". L.O.P.= 13.0" ( without recoil pad ). Weight: 296g ( 10.9 oz)
 AR15 T6 Collapsible Stock
 |
|
Click to enlarge image(s)
|
In Stock
With our military and law enforcement customers in mind, our T6 Collapsible Stock has been designed with necessary improvements over traditional models. Reinforced latch supports and a thicker buttplate ensures the stock assembly will provide a solid platform for engaging your target. The six (6) position stock fits the weapon to the shooter regardless of body type or the individual equipment being worn. It is ideal when operating in confined environments or when compact storage is required. Sold as a complete installation kit, the T6 stock includes the receiver extension, buffer with spring, locking nut with plate, and sling swivel. Manufactured of military grade composite for years of use.
 AR-15 M-16 Cleaning Kit
 |
|
Click to enlarge image(s)
|
Complete Model 15/16 Cleaning Kit with 5 piece rods (includes loop), adaptor, bronze bore brush, chamber brush, dual-ended nylon brush, oil bottle, and cleaning cloth
Accessories are neatly stored into a 2-compartment lightweight nylon storage bag with Velcro closure. Alternatively, they can be easily stored in the A-2 buttstock as well
8.6 oz Cleaning Kit replaces conventional hefty weight cleaning gear. Great for field operations or at-home cleaning
Pouch includes belt loop and Alice clip for attachment to belt or web gear
|
Note: All prices in US Dollars
|
|
