|
|
AR15 Mounting Solutions

AR-15 Quad Rail

In Stock
 |
 |
| Click to enlarge image(s) |
This two piece quad rail system replaces your existing hand guard, and screws together to create a rock solid hand guard with unlimited mounting solutions.
Precision machined aircraft grade aluminum for extreme strength, and hard anodized finish that will hold up under extreme conditions. Fits carbine length models.
Includes rubber rail guards for added comfort.
Smith & Wesson uses this same rail system on their M & P Tactical rifles.
This is by far the best quad rail system for the money.
Mid Length QUAD RAIL SYSTEM

Sold Out
 |
|
| Click to enlarge image(s) |
Precision machined with maximum strength
Four mil-spec Picatinny rails for versatile accessory applications
Simple and friendly installation, no gunsmith or tool required
Solid locking features for most secure fit
Ultimate tactical solution to enhance accuracy under toughest environments
Fits mid length Model 4,15,16 rifles and variants
Hard anodized finish for wear resistance
UTG rubber rail guard included for great comfort and protection
UTG Full Length Quad Rail

Back in Stock
 |
|
| Click to enlarge image(s) |
Precision machined with maximum strength
Four mil-spec Picatinny rails for versatile accessory applications
Simple and friendly installation, no gunsmith or tool required
Integral assembly alignment front tabs and spinal cords to guarantee perfect rock solid fit
Ultimate tactical solution to enhance accuracy under toughest environments
12" long top & bottom covers
27 slots on each side of Picatinny/Weaver quad rail
Fits rifle length Model 4, 15/16 and variants
Hard anodized finish for wear resistance
20 pieces of UTG rubber rail guards included for great comfort and protection
AR15 Riser Mount

 |
|
| Click to enlarge image(s) |
Picatinny style riser mount for flat top AR-15s, FALs and other rifles. Precision machined to exact tolerances from aircraft-grade aluminum alloy. Clever retention thumb nuts and locking plate for easy and quick installation. Anodized black matte finish. Has plenty of slots for maximum scope ring adjustments.
AR-15 Carry Handle Mount

 |
|
| Click to enlarge image(s) |
Superior mil-spec quality for serious use at a fraction of the cost of other brands.
AR-15 Tri-Rail Barrel Mount

 |
|
| Click to enlarge image(s) |
Includes spacers to fit most AR barrels. I personally use this mount on my Colt rifle, and it gets plenty of use and has proven to be a rock solid mounting platform for all my needs.
If you’re planning on installing a bipod on your AR-15 this mount is a great choice.
Surefire M73 AR / M4 Picatinny Forend

 |
|
| Click to enlarge image(s) |
The M73 Picatinny rail forend from SureFire, the tactical technology company™, is a high-quality Picatinny forend for the AR/M4-type carbines that replaces the weapon's stock forend allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better,and provide rock-solid weapon fit. These precision rails enable consistent " repeat zero" of any accurately dimensioned devices attached to them, such as SureFire lasers or WeaponLights.
Surefire M81M16 Mid-Length Picatinny Forend

 |
|
| Click to enlarge image(s) |
The SureFire M81 Picatinny rail forend is a high-quality Picatinny forend for M4 mid-length carbine with round handgaurd cap that replaces the weapon's stock forend allowing the user to mount a variety of accessories. Machined from military specification hard-anodized aluminum, they're stronger, dissipate heat much better,and provide rock-solid weapon fit. These precision rails enable consistent "repeat zero" of any accurately dimensioned devices attached to them, such as SureFire lasers or WeaponLights
AR-15 Hand Guard Picatinny Rails

 |
|
| Click to enlarge image(s) |
Constructed from aircraft grade aluminum for extreme strength.
Designed to fit all M-16 & M-4 hand guards.
This system includes two rails and all necessary mounting hardware.
AR-15 Quad Rail Gas Block

Back in stock
 |
|
| Click to enlarge image(s) |
Robust gas block Picatinny quad-rail modular system to replace existing front sight and allows for versatile accessory applications. Machined from aircraft aluminum. Perfect fit with our solid front sight to retain your iron sights.
AR-15 Tactical Goose Neck Mount

 |
|
| Click to enlarge image(s) |
This is an extremely versitile 3 rail mount designed to attach to your AR-15 or M-16 carry handle.
Cunstrcted from aircraft grade aluminum and hard anodized.
This mount includes 25mm tactical rings.
AR-15 Tri-Rail Ring

 |
|
| Click to enlarge image(s) |
AR-15 Match-grade Rear Sight

Amazing quality at an affordable price
 |
|
| Click to enlarge image(s) |
Integral Picatinny mounting deck to fit all flat tops
Equipped with locking retention thumb nut
Precision windage and elevation adjustments
Dual aiming apertures for all shooting requirements
Synchronize iron sight with tactical dot/reticle
Dramatically improves sight pictures and enhances shooting accuracy
AR15 Removable Front Sight Tower

Amazing quality at an affordable price
 |
|
| Click to enlarge image(s) |
Quick detachable front sight with adjustable A2 Square Post Assembly to fit all Picatinny/Weaver-style rails.
Equipped with locking retention thumb nut.
Precision elevation adjustments to enhance shooting accuracy.
Deluxe See-Thru Riser with Picatinny Tri-Rail Mount and STANAG Dimension

 |
|
| Click to enlarge image(s) |
1. Creative Mounting Base and Locking Plate to Fit on any Picatinny and Weaver Rail
2. Clever Picatinny Tri-Rails for Flashlight, Laser and Additional Accessory Applications
3. Additional STANAG Dimension for Most Versatile Applications
4. Ideal Height, Length and Spacing to Accommodate Most Versatile Applications
|
|
|