Related Items

Related Items

Sort By:
4x20 Mini Size AR-15 Scope4x20 Mini Size AR-15 Scope4x20 Mini Size AR-15 Scope with Bullet Drop Compensator
6x32 Mini Size Rubber Armored Range Estimating Mil-Dot6x32 Mini Size Rubber Armored Range Estimating Mil-Dot6x32 Mini Size Rubber Armored Range Estimating Mil-Dot Red/Green Illuminated Scope
AR-15 30 Round Magazine D&HAR-15 30 Round Magazine D&HAR-15 / M-16 Mil-Spec 30 round magazine
AR-15 Carry Handle MountAR-15 Carry Handle MountAR-15 Carry Handle Mount
AR-15 Free Float Quad RailAR-15 Free Float Quad RailAR-15 Free Float Quad Rail
AR-15 Magazine CouplerAR-15 Magazine CouplerAR-15 Dual Magazine Coupler
AR-15 Tri-Rail Barrel MountAR-15 Tri-Rail Barrel MountAR-15 Tri-Rail Barrel Mount
AR-15 USGI SlingAR-15 USGI SlingAR-15 USGI Sling
Deluxe Flashlight with Integral MountDeluxe Flashlight with Integral MountDeluxe Flashlight with Integral Mount
M4 Deluxe Butt Pad -Combat StyleM4 Deluxe Butt Pad -Combat StyleM4 Deluxe Butt Pad -Combat Style
M4 Shorty Handguard with LinerM4 Shorty Handguard with LinerM4 Shorty Handguard with Liner
Sort By:
Cart

Cart

Items: 0
Subtotal: $0.00
AR-15 Stocks

AR-15 Stocks

AR-15 Stocks

AR-15 Stocks

ACE  M4 SOCOM Stock

ACE M4 SOCOM Stock

ACE  M4 SOCOM Stock
Click to enlarge image(s)
Designed with input from combat experienced SF soldiers. This is the strongest production AR15/M16 stock available! Approximately 6 times stronger than an AR15 A2 stock & receiver extension tube. Ideal for CQB or breaching doors, and without the fear of bending the receiver extension tube ( which disables the rifle ). Adjustable length of pull, adjusts from 7.5" to 9.5" in five 1/2" increments. The M4 SOCOM comes with extra hardware so that it can be set up to be a rock-slid fixed (non-adjustable) stock. This set-up is ideal for dynamic entry, extreme CQB or large caliber AR conversions. Closed-cell foam overtube provides an extremely comfortable cheek weld. This stock mounts "rock solid' to the rifle with no movement making it an ideal stock for precision shooting as well. Ambi-sling mount / gusset reinforces the receiver extension tube at its weakest point- just behind the receiver. Four sling positions allows optimum sling mount flexibility. With the 1.0" pad it is also ideal for use with .50 BMG AR uppers. Comes with your choice of 1.0" or .5" recoil pads. Uses carbine length buffer and spring ( not included ).

New M4 SOCOM '06. Has the following updates: removable, ambidextrous ss-ar sling swivel; tapered extension tube and gusset; larger stronger clamp screw; improved slide key; square taper locking plunger.

L.O.P. fully collapsed 11.0 " and fully extended 13.0" without recoil pad. Weight: 460g (16.5 oz)
ACE Full Length AR-15 SOCOM Stock

ACE Full Length AR-15 SOCOM Stock

ACE Full Length AR-15 SOCOM Stock
Click to enlarge image(s)
M4 SOCOM (L) ACE's infamous super heavy duty stock is available now with a full length receiver extension tube. Uses an A1/A2 buffer and spring (not included). Can also use pneumatic recoil systems and on all .308 (7.62 X 51mm) AR type rifles. Length 9.5" to 11.5" in five 1/2" increments. Length of pull from 11.5" to 13.5" measured with out recoil pad. A 1/2" recoil pad is included. Foam cheek rest is approximately 6" long.
Super Heavy Duty ACE M4-7

Super Heavy Duty ACE M4-7

Super Heavy Duty ACE M4-7
Click to enlarge image(s)
You are in a combat situation. You dive into a ditch and land on your rifle. You bend your receiver extension tube slightly (as little as 2 degrees). You return fire... first round, rifle malfunctions and your bolt carrier is stuck in your receiver extension tube. Worse, the stuck bolt carrier will not allow you to field strip your rifle and clear the malfunction. Don't let this happen to you! Buy an ACE M4-7 or a M4-7 RET. M4-7 and M4-7 RET. Patent pending.

Gusset reinforced receiver extension tube (RET) is many times stronger than the current issue mil. spec. RET. A tapered RET and gusset reinforce the receiver, and when the gusset screw is tightened the gusset is pulled tight into the receiver.
Laser etched delineations, ensure a visual confirmation of your stock's position.
Seven position for the perfect fit. RET extends out to 11.0" long in seven 5/8" increments. Fully collapsed it is the same length as any other M4 six position stock- 7.3".
Adjustable screw in stainless steel stops, allow repeat adjustment to the same position every time in any conditions.
Adjustable shim screw-in RET allow slop and rattle to be adjusted out of the stock.
Four sling positions. "Ambi" single point, top and bottom.
Includes SS-AR, rubber coated, 360 degree, 1 1/4" sling swivel.
ACE AR-15 Ultra Light Entry Stock

ACE AR-15 Ultra Light Entry Stock

ACE AR-15 Ultra Light Entry Stock
Click to enlarge image(s)
Same as the Ultra Light except the overall length is 7.125". Uses a special short receiver extension tube - included. CAR length buffer and spring not included.
AR15 Skeleton Stock

AR15 Skeleton Stock

AR15 Skeleton Stock
Click to enlarge image(s)
The AR15 Skeleton Stock - ARFX. The ARFX is 3.6 oz lighter than the A2 stock, while still retaining high strength and durability. A closed-cell foam "overtube" provides a super comfortable cheek weld, and it insulates the shooter's face from vibration and temperature extremes.
The ARFX also sports three sling positions: right and left behind the receiver and one at the toe of the butt. Uses a standard A1/A2 receiver extension tube, buffer and spring ( not included ). Includes .5" thick rubber "over-mold" recoil pad. Can be installed on " Post Ban" rifles.

Over all length 9.8". L.O.P.= 13.0" ( without recoil pad ). Weight: 296g ( 10.9 oz)
ARFX Entry stock

ARFX Entry stock

ARFX Entry stock
Click to enlarge image(s)
ARFX Entry stock. This stock is only 7.25" long without recoil pad; yet is strong enough for its intended purpose "Close Quarters Battle." CQB usually involves heavy armor and the need for a stock that can be used to breech light doors or in hand to hand combat. Uses CAR length buffer and spring (not included). Special receiver extension tube, Sling swivel, foam overtube and choice of .5" or 1.0" recoil pad are included.

Length 7.25". L.O.P.=10.45" (without recoil pad ) Weight: 265g ( 9.7 oz)
AR-15 6 Position Stock

AR-15 6 Position Stock

AR-15 6 Position Stock
Click to enlarge image(s)
Made In USA.
6 position collapsible stock for all AR-15 type weapons.
Includes the stock, spring, buffer, & aluminum tube.
This stock has been completely redesigned to be the toughest and most reliable standard M4 type stock available.
AR15 T6 Collapsible Stock

AR15 T6 Collapsible Stock

AR15 T6 Collapsible Stock
Click to enlarge image(s)
With our military and law enforcement customers in mind, our T6 Collapsible Stock has been designed with necessary improvements over traditional models. Reinforced latch supports and a thicker buttplate ensures the stock assembly will provide a solid platform for engaging your target. The six (6) position stock fits the weapon to the shooter regardless of body type or the individual equipment being worn. It is ideal when operating in confined environments or when compact storage is required. Sold as a complete installation kit, the T6 stock includes the receiver extension, buffer with spring, locking nut with plate, and sling swivel. Manufactured of military grade composite for years of use.
Choate AR-15 E2 Stock

Choate AR-15 E2 Stock

Choate AR-15 E2 Stock
Click to enlarge image(s)
Telescoping AR15/M16 stock with Battery storage. Comes with Recoil spring tube, spring and buffer

Introducing the new Telescoping AR15/M16 stock with battery storage tubes on the side. This five position telescoping stock has two storage compartments with O-ring sealed screw in caps. The storage compartments are water tight and will hold two AA or three 123 Lithium batteries in each side. The stock has a nonslip hard rubber butt plate and three places to attach a sling These stocks have our life time warranty and built tough enough so you never have to use it.
CBST 6 position collapsible stock with tube assembly

CBST 6 position collapsible stock with tube assembly

CBST 6 position collapsible stock with tube assembly
Click to enlarge image(s)
NTOA (National Tactical Officers Association) tested and recommended.

Six-position collapsible stock with rubber non-slip recoil pad and skeletonized design features a Picatinny rail and storage compartment for CR123 batteries (4 total) or other small items. Ambidextrous design is easily achieved by switching the battery compartment lid and Picatinny rail. Two ultrasonically welded metal inserts allow for the addition of optional quick release sling adaptors (PBSS).

Includes buffer tube, buffer spring, buffer assembly, nut, and collar
Copyright © IFA Tactical, LLC Sterling Heights, Michigan
apsjk@sbcglobal.net